AFI-FS – Water Filtration System
MULTI GRADE FILTERS
The “AFI-FS” “ESP” and “GHL” series of multigrade filters have been designed for effective reduction of particulate and colloidial matter in the water supply. Aqua Filsep multigrade filter operates on the principle of depth filter. Filters are charged with coarse and fine quartz silica sand mixed together in a required proportion. The benefits of graded mixed media is, that it produces a filter bed with adequate pore dimensions for retaining both large and small suspended particles. These filters are operated at substantially higher specific flow rate than conventional filters.
Our standard “ESP” and “GLH” series of filtration System range from 0.75 M3/hr to 210 M3/hr. GHL Series are made from FRP and ESP series from Mild Steel.
Technical Data “GHL” Series Filters
Model | Feed water flow and suspended solids | |
---|---|---|
25 ppm | 50 ppm | |
M3/hr | M3/hr | |
MF-GHL-5101 | 1.5 | 0.75 |
MF-GHL-221 | 2.0 | 1.0 |
MF-GHL-5231 | 2.5 | 1.3 |
MF-GHL-8241 | 2.8 | 1.4 |
MF-GHL-461 | 4.0 | 2.0 |
MF-GHL-581 | 5.0 | 2.5 |
MF-GHL-612 | 6.0 | 3.0 |
MF-GHL-5842 | 8.5 | 4.2 |
MF-GHL-3103 | 13 | 6.5 |
MF-GHL-0263 | 20 | 10 |
MF-GHL-7224 | 27 | 13.5 |
MF-GHL-5384 | 35 | 17.5 |
Maximum operating pressure 3.0 Kgs/cm2 |
SPECIAL FEATURES
- Operates at higher flow velocity
- Designed for higher suspended inputs
- Raw water can be used for backwashing
- Very little maintenance
- Lower backwash water requirement
- Requires less space than conventional filters
AFWTPL “AFI-FS “GHL Series filter
GHL series standard filters are designed in twelve basic sizes closely match most industrial or commercial requirement. Unit flow ranges from 0.75 M3/hr. to 35 M3/hr.
SPECIFICATION
- One Vertical Cylindrical FRP pressure vessel.
- One Set of internal water distribution and collection system.
- One intial charge of filter sand and under bed material.
- One set of frontal pipe work and valve in corrosion resistance plastic.
- Two pressure gauges to monitor head loss across the filter.
AFWTPL “AFI-FS “ESP” Series filter
AFI “ESP” series industrial multigrade filters are developed for colloidal and turbidity control. Thirteen Models are available, having flow rates from 4 M3/hr to 210 M3/hr.
SPECIFICATION
- One Vertical Cylindrical mild steel pressure vessel painted internally and externally with epoxy paint.
- One Set of internal water distribution and collection system.
- One intial charge of filter sand and under bed material.
- One set of mild steel frontal pipe work and cast iron valve.
- Two pressure gauges to monitor head loss across the filter.
TECHNICAL DATA “ESP” SERIES FILTERS
Model | Feed water flow and suspended solids | |
---|---|---|
25 ppm | 50 ppm | |
M3/hr | M3/hr | |
MF-ESP-806 | 8 | 4 |
MF- ESP-518 | 15 | 7 |
MF- ESP-3210 | 23 | 12 |
MF- ESP-3312 | 33 | 16 |
MF- ESP-6414 | 46 | 23 |
MF- ESP-1616 | 61 | 30 |
MF ESP-6718 | 76 | 38 |
MF- ESP-4920 | 94 | 47 |
MF- ESP-31122 | 113 | 56 |
MF- ESP-53124 | 135 | 57 |
MF- ESP-95126 | 159 | 79 |
MF- ESP-48128 | 184 | 92 |
MF- ESP-11230 | 211 | 105 |
Maximum operating pressure 3.0 Kgs/cm2 |
You can Contact Us to get more information related to our AFI-FS – Water Filtration System and other services.