"Ultra-FS"
Filtration
System
|
| MULTI
GRADE FILTERS |
|
The “Ultra-FS” “ESP”
and “GHL” series of multigrade
filters have been designed for effective reduction
of particulate and colloidial matter in the
water supply. Aqua Filsep multigrade filter
operates on the principle of depth filter.
Filters are charged with coarse and fine quartz
silica sand mixed together in a required proportion.
The benefits of graded mixed media is, that
it produces a filter bed with adequate pore
dimensions for retaining both large and small
suspended particles. These filters are operated
at substantially higher specific flow rate
than conventional filters.
Our
standard “ESP” and “GLH”
series of filtration System range from 0.75
M3/hr to 210 M3/hr. GHL Series are made from
FRP and ESP series from Mild Steel.
|
| |
| Technical
Data “GHL” Series Filters |
| Model |
Feed
water flow and suspended solids |
| |
25
ppm |
50
ppm |
| |
M3/hr |
M3/hr. |
| MF-GHL-5101 |
1.5 |
0.75 |
| MF-GHL-221 |
2.0 |
1.0 |
| MF-GHL-5231 |
2.5 |
1.3 |
| MF-GHL-8241 |
2.8 |
1.4 |
| MF-GHL-461 |
4.0 |
2.0 |
| MF-GHL-581 |
5.0 |
2.5 |
| MF-GHL-612 |
6.0 |
3.0 |
| MF-GHL-5842 |
8.5 |
4.2 |
| MF-GHL-3103 |
13 |
6.5 |
| MF-GHL-0263 |
20 |
10 |
| MF-GHL-7224 |
27 |
13.5 |
| MF-GHL-5384 |
35 |
17.5 |
| Maximum
operating pressure 3.0 Kgs/cm2 |
|
| |
| SPECIAL
FEATURES |
|
Operates
at higher flow velocity |
|
Designed for higher suspended inputs |
|
Raw water can be used for backwashing
|
|
Very little maintenance |
|
Lower backwash water requirement |
|
Requires less space than conventional
filters. |
|
| |
| AFWTPL
“ultra-FS “GHL Series filter |
| GHL
series standard filters are designed in twelve
basic sizes closely match most industrial or
commercial requirement. Unit flow ranges from
0.75 M3/hr. to 35 M3/hr. |
| |
| SPECIFICATION: |
|
One Vertical Cylindrical FRP pressure
vessel. |
|
One Set of internal water distribution
and collection system |
|
One intial charge of filter sand and under
bed material. |
|
One set of frontal pipe work and valve
in corrosion resistance plastic. |
|
Two pressure gauges to monitor head loss
across the filter. |
|
| |
| AFWTPL
“ultra-FS “ESP” Series filter |
| Ultra
“ESP” series industrial multigrade
filters are developed for colloidal and turbidity
control. Thirteen Models are available, having
flow rates from 4 M3/hr to 210 M3/hr. |
| |
| SPECIFICATION: |
|
One Vertical Cylindrical mild steel pressure
vessel painted internally and externally
with epoxy paint. |
|
One Set of internal water distribution
and collection system |
|
One intial charge of filter sand and under
bed material. |
|
One set of mild steel frontal pipe work
and cast iron valve. |
|
Two pressure gauges to monitor head loss
across the filter. |
|
| |
| TECHNICAL
DATA “ESP” SERIES FILTERS |
| Model |
Feed
water flow and suspended solids |
| |
25
ppm |
50
ppm |
| |
M3/hr |
M3/hr. |
| MF-ESP-806 |
8 |
4 |
| MF-
ESP-518 |
15 |
7 |
| MF-
ESP-3210 |
23 |
12 |
| MF-
ESP-3312 |
33 |
16 |
| MF-
ESP-6414 |
46 |
23 |
| MF-
ESP-1616 |
61 |
30 |
| MF
ESP-6718 |
76 |
38 |
| MF-
ESP-4920 |
94 |
47 |
| MF-
ESP-31122 |
113 |
56 |
| MF-
ESP-53124 |
135 |
67 |
| MF-
ESP-95126 |
159 |
79 |
| MF-
ESP-48128 |
184 |
92 |
| MF-
ESP-11230 |
211 |
105 |
| Maximum
operating pressure 3.0 Kgs/cm2 |
|
