"Ultra-Softenizer"
|
| UPFLOW
SOFTENER |
Aqua Filsep “Ultrasoftenizer”
are used for reducing hardness-forming calcium
and magnesium ions by exchanging them with
soluble sodium ions. The hard water is passed
through bed of strong Cation exchange resin
bed. The hardness from water is exchanged
to produce soft water. At the end of each
service cycle, the ion exchange resin is regenerated
with sodium chloride solution, after which
the unit is ready for the next service cycle..
Aqua
“Ultrasoftenizer” “PS-U”
and “IS-U” series are designed
on COUNTER CURRENT REGENERATION technique,
an advanced softening technique developed
to treat large volumes of high hard water.
|
| |
| Application |
| |
|
Pre treatment to reverse osmosis plant |
|
Low pressure boiler feed |
|
Process house |
|
Cooling tower water |
|
Laundry |
|
Air conditioner’s |
|
Beverage production |
|
Hospitals & Hotels |
|
| |
| Special
Features |
|
Wide
application |
|
Fifteen
basic sizes closely match most industry
or commercial requirements for soft
water on a continuous basis. |
|
|
|
Construction
features |
|
“Ultrasoftenizer
-PS” series softeners are made
from Fiber Reinforced plastic (FRP)
, pipes of PVC, valves of ABS and brine
tank of HDPE. This materials are light
in weight and corrosion and maintenance
free.
Ultrasoftenizer
-IS” series softeners are made
from Mild steel, fabricated as per GOOD
ENGINEERING PRACTICE. |
|
|
|
Easy
Operation |
|
One
single multi port valve accomplishes
all operation steps. These valves are
single lever operated. The lever position
clearly indicates steps of regeneration
and operation sequences in progress.
This makes its operation fool proof
by reducing operator error substantially |
|
| |
| ADVANTAGES |
| |
|
FRP construction, lightweight, easy
to install. Does not require civil work. |
| |
|
|
Pre-assembled and factory tested before
shipment, the softener can be installed
and commissioned within a day. |
| |
|
|
Easy to Operate due to single lever-operated
multi port valve. |
| |
|
|
Maintenance and corrosion free as softener
unit is in FRP construction and piping
in Industrial Grade heavy duty PVC. |
| |
|
|
Lower maintenance cost and easy availability
of spares. |
|
| |
| Specifications |
| |
|
|
One Fiber reinforced plastic (FRP),
pressure vessel fitted with special
internal distributors. |
|
|
|
One single lever- operated multi port
manual Valve with brine ejector and
plastic piping. |
|
|
|
One complete charge of high efficiency
Cation Resin in Sodium form |
|
|
|
One Combined salt tank of HDPE/FRP with
fittings |
|
|
|
Auto units are available. |
|
| |
Sr.
No.
|
Model |
Flow
rate M3/hr |
Output
/ |
Salt
|
Treated
Water Hardness ppm as |
| |
|
Min.
|
Max. |
Regn
M3 |
Regn
Kgs. |
CaCo3 |
1 |
PS-
836 /F |
0.16 |
1.6 |
10 |
6 |
<
5 PPM |
2. |
PS-
1056 /F |
0.2 |
2.0 |
16 |
9 |
<
5 PPM |
3. |
PS-
1280 /F |
0.35 |
3.5 |
22 |
13 |
<
5 PPM |
4. |
PS-
1310 / F |
0.4 |
4.0 |
30 |
17 |
<
5 PPM |
5. |
PS
– 1415 / F |
0.5 |
5.0 |
42 |
24 |
<
5 PPM |
6. |
PS
– 1618 /F |
0.6 |
6.0 |
51 |
29 |
<
5 PPM |
7. |
PS
- 1825 / F |
0.85 |
8.5 |
71 |
40 |
<
5 PPM |
|
| |
| (1).
Output Based on 200 ppm of total hardness as
CaCo3. |
| (2).
Min. working pressure 1.8 Kgs/cm2 and max single
working pressure 3.5 kgs/cm2(g). |
| |
